Wanna take part in the Great British Sewing Bee Series 2....

"What?" I hear you cry... you read right. 

BBC2 are looking for all you talented UK based sewing Ladies and Gents to send in your applications to take part in the next chapter of the Great British Sewing Bee.

So if you’re at home behind a sewing machine and you know godets from your gussets we’d love to hear from you. 

So have I got you hooked.... here is what you have to do... 

To find out more, contact us now:

020 70674822 / sewing@loveproductions.co.uk

Or for an application form go to:

http://www.loveproductions.co.uk/be-on-tv

Be quick as the closing date is the 9th June 2013!

Good luck and let me know if you enter!

Happy GBSB x

Cutting, Pinning and Overlocking...

Hello Ladies and Gentlemen....

With another sunny day in London I cracked on with my next sewing project and am well pleased with my progress... I'll blog on this soon but as it is a gift for a good friend it'll have to be kept under wraps for a little while longer! 

In my last bloggie I got to the point of pinning the pattern to the fabric. So, armed with fabric scissors I snipped out the pattern - slowly and carefully to make sure it was as accurate as possible. With the pattern still attached the fabric the darts needed to the drawn on. As I wanted a more vintage skirt, I put all the darts on the skirt - this gives it more shape and shows off those dangerous curves. This part is a little fiddly and takes patience - the best way to do this is to put a pin through the dart pattern (where the little circles are) all the way through to the pattern from the wrong side of the fabric. By putting the pin through you will be able to see where the dart goes and be able to mark with tailors chalk on the wrong side of the fabric. Once marked, remove the pins and join the tailors chalk together to make a 'V' shape. A great link to show this is called Accurate Darts without Permanent Mark posted on Thread Magazine website - link below. Do this for all darts.

 

Trying on for size

With my pattern pieces successfully cut out I was eager just to pin the pieces together, but this wasn't the case - the seam needed to marked on the wrong side of the fabric. When marking the seam, I used a hemming ruler to measure 1.5cm along the edge to ensure the seam would be equal on the inside. A great blog on marking fabric is by Tilly and the Buttons called Marking and Cutting Fabric - link below. Once marked with tailors chalked I pinned the pieces together, also not forgetting to pin the darts (when pinning the darts, align where the tailors chalk is and pin it - it'll make a mini 3D triangle) and for the first time I could actually visualise the skirt.  Top tip: Before going on, do try on what you have pinned. Be careful not to stab yourself when doing this but this will help to see how the skirt will fit and check the length. With some assistance, the waist of my skirt had to be taken in a bit to make it more snug. This was simply pinned on both sides. As the waist was altered the darts needed to be checked but I was lucky as the alignment was still good. With the skirt ajusted I gently wiggled out of it and went and make the slight alterations. To ensure this was accurate, where the new pins

Marking with chalk

were I marked with tailors chalk on the wrong side of the fabric before removing them. This shows a line which will need to be drawn and again measured 1.5cm to get the seam correct. Top tip: If any alterations are made at this stage it is good to pin the pattern back on the fabric when cutting out the alterations. This will save time when you make the skirt next time as the measurements will all ready have been done!

Overlocking bliss!

With the fabric cut the edges needed to be tidied in order not to fray or damage the fabric. There are numerous ways this can be done however we were fortunate enough to have overlockers. I've never used an overlocker before so Claire-Louise showed me how to use it and I was amazed by this machine. It first cuts the fabric then encapsulates the edges by weaving four threads around them - it was flippin' fantastic and now on the wants list! Top tip: If you don't have an overlocker another way to tidy the edges is with a zig-zag stitch. Let one stitch go into the fabric and the other fall out of it so it catches the loose threads. This is good but won't work on all fabrics, so please check before trying! The pieces of fabric were overlocked on three sides (leaving the top) and I was ready to join the pieces together.... but that is for another day and another blog.

Again, I learnt so much in a short amount of time. From cutting the fabric, marking darts, using overlockers and again that patience is crucial when learning something new. Next time I will look at sewing, facings and invisible zips!

Top tips:

• Equipment: Pattern, dress makers ruler (or a long ruler), hemming ruler, tape measure, scissors, tailors chalk, pins, overlocker (or a zig zag stitch) and a mirror to look at your garment under construction.
• Before going on, do try on what you have pinned. Be careful not to stab yourself when doing this but this will help to see how the skirt will fit and check the length
• If any alterations are made at this stage it is good to pin the pattern back on the fabric when cutting out the alterations. This will save time when you make the skirt next time as the measurements will all ready have been done!
• If you don't have an overlocker another way to tidy the edges is with a zig-zag stitch. Let on stitch go in the fabric and the other fall out of it so it catches the loose threads. This is good but won't work on all fabrics, so please check before trying! 
• Patience!!!!!!!!!!

Useful websites/ blogs:

• Thread Magazine website - http://www.threadsmagazine.com/item/4513/video-accurate-darts-without-permanent-marks
• Tilly and the Buttons - http://www.tillyandthebuttons.com/2013/01/marking-cutting-fabric.html

Happy Overlocking x

Fabric Perfection

Hello Ladies and Gents…

With such a glorious day it has given me the boost to share with you the next installment about making an 'A' Line skirt. I attended a one day course ran by The Thrifty Stitcher in Stoke Newington, North London and so far I have shared with you my pearls of wisdom on pattern cutting from a beginners perspective. I will now share with you how to prepare your fabric before the big snip-snip...

Now before you cut your fabric, the fabric must be washed and pressed. The washing of the fabric will decrease the likelihood of the fabric shrinking once the garment is made – you don’t want all your hard work to shrink in the wash and come out all teeny and toasty. The pressing of the fabric will ensure it is smooth again decrease the likelihood of cutting out the wrong size pieces as after all smooth fabric is a smaller surface than creased. So, top tip: wash and press.

So with my washed and pressed fabric and with the pattern size selected we Mark the 'Wrong Side' turned to look at the fabric. I selected a fabric that was plain, but spoke volumes in colour as it was such a vibrant royal blue. A plain colour is quite difficult to decide which side is the ‘right-side’ of the fabric. With close examination, it is the side that is the smoothest appearance. Top tip: Once you know which is the ‘right-side’ put strips of tailors chalk on the ‘wrong-side’ – this easily identifies what side is which and will reduce the likelihood of stitching the wrong sides together. I folded the fabric in half (wrong-sides together) and smoothed the fabric over with my hand. To ensure the fabric is aligned line up the selvedge edges and not the edges that are fraying - this will normally highlight if the fabric has been cut straight. I placed the front pattern piece on the fold – this is so there are no seams at the front of the skirt and to follow the grain. I then placed the back piece on the fabric.

Now, this part is quite complex for my little brain to deal with, but I will do my

Ready for the Snip!

best to explain. With the front piece being on the fold, it naturally follows the grain line as you have smoothed the fabric so that the selvedge edges are aligned. For the back piece you need to align the pattern with the grain. On the pattern it will highlight the direction of the grainline – this needs to be straight and follow the direction of the thread. I measured the distance between the top-edge as the pattern needs to be the same distance to ensure the fabric grain is correct. A great blog that also explains this is by Tilly and the Button called Before You Cut Your Fabric - link below. With my fabric ready I placed my pattern onto my it and pinned into place... ready to be cut.

This phase taught me a great deal about the fabric itself - about the selvedge, grain, grainlines, etc - all adding to memory banks for future reference! Next time I will blog about cutting the fabric and pinning....

Top tips:

• Equipment: Washing machine, iron, fabric, tailors chalk, pins and sewing pattern
• Wash and press
• Once you know which is the ‘right-side’ put strips of tailors chalk on the ‘wrong-side’ – this easily identifies what side is which and will reduce the likelihood of stitching the wrong sides together

Useful websites/ blogs:

• Tilly and the Buttons -  http://www.tillyandthebuttons.com/2013/01/before-you-cut-your-fabric.html

Again, I'd would like to say a massive thank you to Claire-Louise and to all at The Thrifty Stitcher for a wonderful creative day.

Happy Fabric Time x

Patterns, Measurements and Maths

Hello Ladies and Gentlemen...

Let me firstly apologies for not blogging sooner... it's been two weeks since I shared with you my adventures but I do have a genuine excuse...it was my birthday! I had a super weekend and birthday day thanks to my husbandy and friends. I was spoilt rotten which can't be a bad thing. I'm now back and spreading the love.

Since my last sewing blog, I have made a few other bits and pieces - primarily involving squares! But my skills were well and truly put to the test when I attended an all day sewing course that involved making an 'A' line skirt. In a previous blog on sewing, I mentioned a great website called 'The Thrifty Stitcher' which has lots of hints and tips to help with sewing projects. The Thrifty Stitcher is an friendly sewing school ran by Claire-Louise Hardie who was a consultant to the BBC2 programme 'The Great British Sewing Bee'. She runs evening, half days and day courses for all levels to try and de-mystify the art of sewing. So with all these exciting courses to chose from I selected the 'An Introduction to Dress Making - Making a Skirt' (link below). 

Fabric Made in UK

Once booked, an email came through of what to expect from the day and what to bring. The key items to bring were fabric, an invisible zip and thread to match the fabric. With these instructions I jumped straight onto the 'Ray Stitch' website where I clicked and examined all the glorious fabrics they had on offer. When it came to the actual selection I remembered the first episode of the GBSB and decided not to get a complex pattern or anything too lightweight! So I selected a truly stunning shade of royal blue in a medium weight cotton (made in the UK) with matching zip and thread.

Thrifty Stitcher HQ

Soon the time passed and the day arrived to head over to Thrifty Stitcher HQ in Stoke Newington. Travel links are simple and they are very, very clear on the website with great photos to help you locate landmarks. I traveled to Highbury and Islington station, hopped on a local bus and after 2 minute walk from the bus I was there.  I entered the building and was greeted by Claire-Louise aka 'The Thrifty Stitcher'. The room had a lovely set up with a big sewing table, sewing machines, over-lockers, samples, fabric, toiles - everything you would expect to see in a sewing room!  I was soon settled down with a cup of tea and chatting away. Some other sewing bees arrived (four in total and the maximum size class) and soon we were all examining each others fabrics. With the creative juices flowing the class began....

Now the plan is to split the day over a series blog. I had to take in a great deal of tips, hints and skills and to get the full benefit from it and not to lose you by reading streams of text, I will break them down into smaller chunks. So, this blog starts at the beginning by focusing on patterns and pattern cutting...

'A' line skirt pattern

The stitching aim of the day was to make an 'A' line skirt. This being my first pattern I have ever cut I was both a little excited and nervous. The skirt pattern is by Butterick (B4461). However before the pattern was released from the packet we needed to be measured. With Claire-Louise armed with a tape measure I had my waist and hips measured. Top tip: If taking measurements, take the measurements from the side of the person and not the front - it will save a lot of embarrassment when you have your face in a strangers crotch! 

Size guide

To select the size of the pattern look at the waist and hip measurements closest to your size (normally located on the back of the packet). If you like a snug fit, go for a size down or if you like a loose fit go for a size up. Top tip: Check the waistline on the pattern itself as it actually tells you how much 'give' it will have once made. A great blog that goes into more detail is by 'Tilly and the Buttons' called 'How to select your sewing  pattern size' (link below). Top tip: Don't worry of you make it larger - it is generally easier to take fabric away than add in. My measurements were a 30" waist and a 41"hip. After checking the guidelines we decided to follow a size 14 pattern (as I like a snug fit) and add an extra 2" to the waist.  To add the 2" to the pattern add 0.5" the front and back piece. (NB: this calculation is based on 2"/4 as you work on four pieces of fabric). 

Adding width

With the packet now in my hands, I opened it and started to make the personal adjustments to the pattern. I added a half of an inch to the front and back piece. To ensure it blended nicely back into the pattern I used a dress making curved ruler and a pencil. Once this was done I cut out the pattern - slowly and accurately. Once cut out it was now time to look at the length. As I wear 1950s/ vintage style clothes I wanted an on-the knee length. To achieve this 5" were added to the pattern. Now I thought this would just be added to the bottom of the pattern - WRONG! On the pattern there is a line that says

Adding length

'lengthen or shorten here' - this is where the additional 5" will be added. Tracing paper can be used but we used a dressmakers square patterned paper. The pattern was cut along the line and pinned to a sewing board that had inches clearly marked on it. The extra pattern paper was inserted and taped (using scotch tape). To ensure continuity a small side piece had to be added and again I used the dressmakers ruler to smooth the curve. The extra paper was cut off and ta-dah I had my finished pattern.

Being my first item made from a pattern I was surprised at the amount of preparation it took even to make the pattern the correct size. I took for granted that a pattern was taken out of the packet, attached to fabric and that was it - boy, was I wrong. Even making sure the pattern fits correctly by adding extra inches to the waist and length takes time but I suppose it's like all things - make sure the preparation is correct and the rest should be easy (well, you will have to wait for the next bit!). Next time I'll look at the fabric and starting to make the skirt!

Top tips:

• Equipment: Pattern, dress makers ruler (or a long ruler), hemming ruler, tape measure pencil, scissors, calculator and a cutting mat. You may also need additional dressmakers paper and scotch tape depending if any alterations are required
• Take body measurements from the side and not the front - it will save a lot of embarrassment when you have your face in a strangers crotch!
•  Don't worry of you make it larger - it is generally easier to take fabric away than add in.
• Check the waistline on the pattern as it actually tells you how much 'give' it will have once made

Useful websites/ blogs:

• The Thrifty Stitcher - http://thethriftystitcher.co.uk/category/classes/intermediate/#make-a-skirt
• Ray Stitch - http://www.raystitch.co.uk/
• Tilly and the Buttons - http://www.tillyandthebuttons.com/2013/02/how-to-select-your-sewing-pattern-size.html

I'd would like to say a massive thank you to Claire-Louise and to all at The Thrifty Stitcher for a wonderful creative day - I will definitely be back for the dress making day! 

Happy Pattern Cutting x

Shower Cap... Circles & Thread

Hello Ladies and Gents,

Over recent months I've started to use dry shampoo and can't believe I've only discovered this wonderful product now. So with my new found love of dry hair shampoo, the need to wash my hair daily has decreased so I thought a shower cap would be a great sewing project. I did my usual world wide web search and found these great blogs by Junie Moon - One Yard Adventure: Shower Cap Tutorial and SewDelish - Some Sewing - How to Make a Shower Cap - Tutorial - links below:

http://junie-moon.blogspot.com.au/2008/08/one-yard-adventure-shower-cap-tutorial.html?m=1

http://sewdelish.blogspot.co.uk/2008/08/some-sewing-shower-cap-mini-tutorial.html?m=1

I assembled all my equipment and started to make the shower cap (see tutorials above for this information). The first challenge was how big was my head?? I got out the tape measure and measured it - it was around 22" (is that big??). After reading the tutorial to calculate how much fabric I'd need I added a buffer of two inches to this to ensure there was enough fabric to fold over and still fit my head.

Tools for the circle

Circle outline

The second challenge was how do I make a perfect circle? After thinking about what I had in the house, I got a large piece of paper, string and a pen. I folded the paper into quarters, cut the string to 12", tied the string around the pen and drew the circle. I then cut the circle out of the paper and laid this on top of the fabric and used my rotary cutter to go around the fabric. I did this for both the waterproof lining and outer fabric.

Paper circle on fabric

Cut fabric - ready to stitch

Pinned fabric

After all this prep I was eager to start sewing...so I followed the instructions and basted the material together in order to keep the fabrics from slipping. So after basting the fabric together, I went to the ironing board, ironed over about a quarter of an inch and then a further inch - when sewn this makes the pocket to thread the elastic through. As I ironed over the fabric, I pinned it down....and this is when I started to wonder if sewing a circle was such a wise choice after all...anyway I had got this far so I persevered. 

All pinned and ready I went back to the sewing machine and started to sew...this is when my patience was well and truly tested. At first I could not understand how to follow the circle - I kept having straight lines! So after a lot of unpicking and re-ironing I started again. This time, I realised I had to nip in little bits as I went round in order to make the circle. I was very pleased with myself that I had worked this out! So feeling confident, I was merrily sewing when disaster struck.... I ran out of thread - how could I run out of thread????

AAHHHHHH!!

With no thread my shower cap project came to an abrupt end -  I couldn't get over how annoyed at myself I was so top tip: always have a spare thread!

A few weeks later, armed with mountains of thread, I carried on with this project... I had mastered how to do the circle and went around the one inch hem (leaving a two inch space so the elastic could be thread around) and stitched around the outer edge. I cut the elastic to 20 inches long, put a safety pin at the end and thread it through. At this point I found it tricky, so I will explain how I overcame the challenge.

When threading the elastic, pin one end at the opening. Use a safety pin on the

Pinned ends

other end of the elastic and thread it all the way through. When back at the start pull the elastic through, safety pin the two ends together and spread the material around over the elastic (by doing this you will be able to see if you need to trim the elastic). I did need to trim the elastic and took off a further 4 inches. With the safety pin now holding both pieces together I hand stitched the ends together. Once happy the ends were secure I undid the safety pin and machine sewed over the top to ensure the elastic was secure...and ta-dah, one finished shower cap!!!

I was so pleased at what I achieved making this. It may seem simple and the tutorials are detailed and easy to follow, but for someone who is new to the sewing bug it used lots of different skills and own initiative to complete this. My next project involve zips so lets see where this takes me!

Hint and tips

• Equipment: Paper, string, pen, iron, cutting board, rotary cutter, water-proof fabric, fabric scissors, pins, safety pins, needles, THREAD, elastic and a sewing machine
• Check what you have in your sewing box...I double check everything now so I don't run out of thread again!
• Research - find a tutorial that works for you
• Patience - I do mention this every time, but it is important. I did take me a good 3-4 weeks to carry on with this project, but I'm so pleased I did as I love what I've made!

Enjoy and take your time!

Happy Stitching x

Finished shower cap!

Minnie Moons and Seamed Stockings

Hello Ladies and Gentlemen,

My vacation started with a bang (or should I say victory roll) by having a successful and fabulous trip to Rockalily Cuts. So how was I to match this on day two? By going to What Katie Did and having a moonicure by Minnie Moons of course! The last event I attended at What Katie Did with Lipstick and Curls was a real delight so when I saw 'Vintage Manicures with Minnie Moons' advertised I just jumped on it. I've always wanted my nails like this as it was a big part of the 1940s/ 1950s look. I've looked at many websites and blogs for inspiration - a great blog is Fashionable Forties: The buildings of a 1940s wardrobe (link: http://fortieswardrobe.blogspot.co.uk/2011/02/1940s-nails.html ) so without hesitation, I looked what was on the menu and went for the 'Full Moonicure (extensive cuticle work, buffing, shaping and painting with half moons/tips)'. With this in mind, I started to grow my nails and look after them like they have never been looked after before.

Nails on my honeymoon (2008)

From a young age my nails have had a battering - the main reason was netball. I started playing netball at the young age of 10 and continued until I was 25. Netball being an alleged non-contact sport required short nails otherwise they were deemed as a lethal weapon (well, they are the way we played in the West Country!) so at the beginning of each game out came the nail clippers and snip snip they were gone. With this and the added bonus of having weak nails my nails have been constantly ignored. The only time they have looked any good was when I got married...and they were not even mine! Anyway, I thought I would treat myself and have these adorable nails done and embarked on growing them for two weeks.

Nails before...plus a slipper

The day arrived, so with my new hair, I left my home wrapped up to keep away the arctic hurricane and went to What Katie Did, Portobello Rd. Now, as you all ready know, I totally love this shop. It just sells the finest vintage lingerie, well fitting and beautiful stockings, glamorous Besame make-up, stunning Bernie Dexter dresses and now Miss L Fire shoes as well - I don't think this shop will ever stop pleasing me. I arrived at the door and was welcomed in by the friendly staff. Sharon from Minnie Moons was there - so I went in and started to have my nails beautified.

Sharon from Minnie Moons

Before starting on my nails, Sharon (aka Minnie Moons) discussed what colours I would like on my nails. There was a wide range of colours from red to green, but as it was my first time I went for the classic red (OPI Big Apple Red) and silver moons. Once the selection was made Sharon dipped, creamed, buffed, cuticled and filed my little nails before starting to paint. As she was doing this we talked about everything and anything from foxes to nails (obviously)! Sharon told me some great tips about how to look after my nails - none of them which I do but from now on I will! 

Red with silver moons

After an hour in the hot seat my nails were complete... gleaming and sparkly in all their moonicure glory. Now comes the hard bit - not to touch anything to stop them from smudging - and I'm pleased to inform you I was a good girl and did not smudge any of them! On my way out I was handed a little goodie bag of some What Katie Did black seamed stockings and a Lindt Easter egg - perfect!

I'd like to say a massive thank you to Sharon of Minnie Moons and to all at What Katie Did for a wonderful morning. Please, please, please get together again, I will be first to book. 

Happy Moonicures x

P.S. I'm writing this 4 days on and they still look as good as when they were done!!

Pearlescent Paradise and Victory Rolls to Boot

Hello Ladies and Gents,

My vacation has finally arrived and one of the best ways to start the break is a trip to Rockalily Cuts. After not going for 17 weeks last time I thought I would not leave it so long to banish my root growth - so I booked an appointment for a colour and a rough blow dry a mere eight weeks from my last appointment.

So, I arrived and was greeted by the lovely Emma, Ryan and Emily (Ree Ree and Lucie are currently in Las Vegas, VLV16 - the lucky ladies). Emma was just finishing off another clients hair and then it was my turn in the hot seat. Emma applied the colour to my roots and I was left to cook. After 40 minutes or so my roots were completed and it was time to add the toner. Now, after my last experience I thought I would never hear myself say it but I asked for a different toner to be applied to my hair. I normally have a blonde toner, but instead I went for a pearlescent one to make my hair have a lilac/ pink tone to it. Emma applied this and my hair turned a super colour - and with no added drama this time.

Whilst I had my toner on I asked if Emily would like to style my hair to give her

the opportunity to practice some vintage styles. She jumped at the chance so when my toner was rinsed off I had my hair dried and styled by Emily. Let me tell you a bit about Emily. Emily is a 21 year old young lady from Weymouth who is currently at Rockalily Cuts for work experience. She is training to be a hairdresser and by the looks of things a very successful one! Emily curled my hair and then put in two victory rolls.... I was very impressed and loved her enthusiasm - this lady will go far.

Again, I can not express how much I love Rockalily Cuts. It truly is a great salon   - welcoming, friendly and relaxing - with a very skilled and talented team of stylists.  I can't wait for my next visit!

Thanks to Emma, Ryan and Emily for a great afternoon... see you soon x

Emily and my new doo...