Finishing Off and Catching Up... oh and Happy New Year!!

Happy New Year Ladies and Gents...

Firstly apologies for the lack of love I've been giving my blog... life has been getting in the way... so I'll do my best to update you with what projects I've been up to and other adventures along the way :)

My last blog was about cutting out the fabric and practicing button holes for the Tofino Lounge Trousers. Now with all the pieces cut out ready, I needed to tidy the edges of the fabric so they didn't fray. I've mentioned before I don't have an Overlocker so I use a zig-zag stitch to stop the edges from fraying. To do this, you put one part of the zig-zag stitch into the fabric and the other over the edge. A great blog which shows this is Tilly and the Buttons - Finishing Seams - Zig-Zag Stitch. Once I had gone around all the pieces of fabric, I pinned the fabric (right sides together) aligning the notches. Once pinned, I took the first leg to the sewing machine, sewing 1.5cm along the seam. I did this to both legs. With legs had been sewn now came the tricky part of sewing them together!

So with this in mind, I re-read the pattern. I inserted one leg inside the other (with one leg right side out and the other inside out), lined up the notches, pinned and sewed following the 1.5cm allowances and as per the pattern. Top Tip: Please make sure you follow the 1.5cm allowance... I think mine varied so when finished the trousers were a little snug. Once sewn together, I pulled the leg out and they actually looked they the beginnings of some trousers... smiles all round :)

The next steps was to make the waistband. As my fabric was light-weight I bought some interface to give the fabric more strength - specifically around the the button holes. I purchased some interface that would be ironed on. Top Tip: Practice ironing the interface on a bit of scrap fabric. This will ensure you iron the right side to the fabric and also check out much heat needs to be applied to make it a success. Once I had done a test run, I cut the interface to fit over the buttonholes and ironed accordingly. Once completed, I made the buttonholes (more information on buttonholes on my previous blog Preparing for Tofino Lounge Trousers) and followed the pattern on attaching the waistband to the legs. 

Waistbands and I don't seem to get along very well. It took me over an hour to understand what the pattern meant. What I worked out was that the waistband goes over legs and not just attached to the top. This is hard to explain, but from the pattern I thought it was pinned to the top - not that the waistband was actually attached up-side-down, wrong side out and over the legs - I hope I've explained it ok! Top Tip: When sewing the waistband don't forget to leave a big enough hole at the back to allow the tie belt and elastic through. Ok, so waistband and legs all attached and nearly finished - hurrah!

Here is when I had a change of heart and made the tie belt. I was lucky enough to have red fabric left over from when I made the red circle skirt so cut out the pattern and fabric and started to make the belt. Once sewn, turn the fabric inside out - please allow some patience for this - it made my hands have cramp but it is worth it. Top Tip: To make sharp points gently push the ends with some fabric scissors but don't push to hard or you'll go through the fabric! Once the belt was complete, I inserted the elastic through the opening in the back of the waistband. Top Tip: When threading the elastic pin one end with a nappy pin to the fabric and put a good size nappy pin on the other end. This makes it easier to thread around the waistband. Once threaded, hand sew the ends of the elastic together - make sure you do this securely. Now thread the tie belt around and hand sew the hole at the back of the waistband. The only thing left to do is hem the trousers and ta-dah - I had finished my Tofino Lounge Trousers all ready for Rhythm Riot!

All in all I would say the trousers took me about 10 hours or so. I found the pattern quite taxing but as a beginner I thought I did quite well. The most challenging part I found was connecting the waistband to the trousers and making the waistband align when stitching in the ditch (stitching in the ditch being sewing in the seam line). I failed badly on this part and had to hand sew the inside part of the waistband as I had sewn this when using the sewing machine. Again, this will take practice and as the trousers are so comfortable I will be making another pair!

Top Tips:

• Equipment: Fabric, pins, pattern, scissors, sewing machine, button hole presser foot and thread - oh and patience!
• Please make sure you follow the 1.5cm allowance... I think mine varied so when finished the trousers were a little snug.
• Practice ironing the interface on a bit of scrap fabric. This will ensure you iron the right side and check out much heat needs to be applied to make it a success
• When sewing the waistband don't forget to leave a big enough hole at the back to allow the tie belt and elastic through
• To make sharp points gently push the ends with some fabric scissors but don't push to hard or you'll go through the fabric!
• When threading the elastic pin (using a nappy pin) one end to the fabric and put a good size pin (again, using a nappy pin) on the other end. This makes it easier to thread around the waistband

Useful websites:

• Tilly and the Buttons:  http://www.tillyandthebuttons.com/2013/03/finishing-seams-zigzag-stitch.html
• 'All you need to know about machine and hand sewing - Sewing Basics' by Sandra Bardwell

Happy Sewing x

Seeing Red? Red Circles of Fabric that is!

Hello Ladies and Gent,

Tools for the job

So I thought I would share with my latest sewing project... which is to attempt to make a circle skirt from a new pattern! When I went to my sewing class earlier this year, Claire-Louise aka The Thrifty Stitcher was kind enough to give me another pattern to try out at home. The pattern she gave me was the Simplicity 2906 which has two skirt patterns to follow but as I had all ready got a pattern for an 'A' line skirt I thought I ought to give the circle skirt a whirl. 

Now the dilemma of what fabric to use! I wanted to get some nice tartan fabric,

Useful hints from Sandra Bardwell

but I thought I would find matching the fabric up rather treaky so thought I better stick within my limits for now so chose a lovely crimson colour. I bought my fabric from Ray Stitch and I can't tell you how impressed I was with my visit. I called the shop the day before to see if they had the crimson fabric in stock along with a red 25cm invisible zip. I was thrilled when they said yes and told them I will see them the next day. When I arrived at 9.05am on Saturday morning they were open and had remembered my call and my goodies were all out ready for me! I was over-joyed that they had remembered and made my trip seamless (no pun intended). Now armed with my fabric (which was washed and pressed) I was ready to start creating!

Cutting lines

The first thing I did was measure myself - sadly my waist was still the same as when I made my skirt in April, but at least I've not grown in size. I took my measurement and I was a size 16 for this pattern. I cut the pattern piece out following the lines carefully and slowly. It was quite tricky as the pattern is large but I persevered  Top Tip: Gently press the pattern to ensure it is at its smoothest. I pressed the pattern when I ironed the fabric or iron it direct on a cool setting. Once cut out I then lined up the pattern on the fabric. This is when I had to remember grainlines and all that good stuff...which at first I had forgotten. I turned to my blog, Tilly and the Buttons blog as well as my good book called 'All you need to know about machine and hand sewing - Sewing Basics' by Sandra Bardwell. Although the pattern came with instructions its written in code for a novice so another Top Tip is always look up something if you are unsure of what it means. Like me I had to remind myself of the selfredge and the grain and I'm pleased I did as I originally pinned the pattern on wrong! 

I prepared my fabric (remembering to put strips of tailors chalk on the wrong

Mark the wrong side of the fabric

side of the fabric) and smoothed it by running my hand over it. Top Tip: Remember that the edge that is cut is not always 100% so don't pin the pattern against the edge. I had to look at this a few times and on the pattern you will have a long arrow which shows the grain line. In this instance the grain line was perpendicular to the selfredge. With my pattern securely pinned to the fabric, I took my fabric scissors and cut around the pattern and snipping a triangle where there were notches. The notches are there to help you line up the fabric pieces. I had to do this twice to make the front and the back piece of my skirt. Top Tip: If possible, this would be easier on a large table. I don't have this luxury but I cleared a large space on my wooden floor and cut carefully around the pattern.

Lining up the grain

Now with my fabric cut I wished I had an overlocker to stop the edges from fraying. However you can make a make-shift overlocker type thing on any sewing machine by using the zig-zag stitch. I set the machine to the longest stitch set on zig-zag and with one side sewn into the fabric and the other side just falling off the edge to catch the thread it secures the edge and helps reduce fraying. I did this to the sides and the bottom of my skirt. Tilly and the Buttons also recommends this but she does it when the hem is complete but I did it before hand - not sure if it makes a difference - time will tell.

I then double checked the instructions and realised I needed to put a 'stay stitch' in the top of the fabric to stop it from stretching. I didn't know what it was so I googled it - it is a long basting stitch that stays in - simple. So for this I set the sewing machine to a straight stitch on the longest setting and ran the stitch 1cm away from the top. Again, following the instructions I marked a 1.5cm hem down the sides with tailoring chalk in preparation for joining the pieces together and that all important invisible zip!

This is where I shall leave it today and tell you in another blog how I get on with the rest of my task! The one thing I will share is that I really enjoy the challenge this pattern is giving me! Its using the skills I have done previously plus being brave enough to try out new ones - lets hope the invisible zip comes as naturally!

Top Tips:

• Equipment: Fabric (2m) with matching zip and thread, fabric scissors, paper scissors, tailors chalk, pins, sewing pattern, sewing machine, invisible zipper foot, general purpose zipper foot and time!
• Gently press the pattern to ensure it is at its smoothest. I pressed the pattern when I ironed the fabric or iron it direct on a cool setting.
• Always look up something if you are unsure of what it means. 
• Remember that the edge that is cut is not always 100% so don't pin the pattern against the edge.
• If possible, work on a large table. I don't have this luxury but I cleared a large space on my wooden floor and cut carefully around the pattern.

Useful Websites:

• Tilly and the Buttons - Stay Stitching - http://www.tillyandthebuttons.com/2013/02/stay-stitching.html
• Tilly and the Buttons - Zig Zag Stitch - http://www.tillyandthebuttons.com/2013/03/finishing-seams-zigzag-stitch.html
• The Thrifty Stitcher - http://thethriftystitcher.co.uk/ 
• 'All you need to know about machine and hand sewing - Sewing Basics' by Sandra Bardwell

Happy Sewing xx 

Cutting, Pinning and Overlocking...

Hello Ladies and Gentlemen....

With another sunny day in London I cracked on with my next sewing project and am well pleased with my progress... I'll blog on this soon but as it is a gift for a good friend it'll have to be kept under wraps for a little while longer! 

In my last bloggie I got to the point of pinning the pattern to the fabric. So, armed with fabric scissors I snipped out the pattern - slowly and carefully to make sure it was as accurate as possible. With the pattern still attached the fabric the darts needed to the drawn on. As I wanted a more vintage skirt, I put all the darts on the skirt - this gives it more shape and shows off those dangerous curves. This part is a little fiddly and takes patience - the best way to do this is to put a pin through the dart pattern (where the little circles are) all the way through to the pattern from the wrong side of the fabric. By putting the pin through you will be able to see where the dart goes and be able to mark with tailors chalk on the wrong side of the fabric. Once marked, remove the pins and join the tailors chalk together to make a 'V' shape. A great link to show this is called Accurate Darts without Permanent Mark posted on Thread Magazine website - link below. Do this for all darts.

 

Trying on for size

With my pattern pieces successfully cut out I was eager just to pin the pieces together, but this wasn't the case - the seam needed to marked on the wrong side of the fabric. When marking the seam, I used a hemming ruler to measure 1.5cm along the edge to ensure the seam would be equal on the inside. A great blog on marking fabric is by Tilly and the Buttons called Marking and Cutting Fabric - link below. Once marked with tailors chalked I pinned the pieces together, also not forgetting to pin the darts (when pinning the darts, align where the tailors chalk is and pin it - it'll make a mini 3D triangle) and for the first time I could actually visualise the skirt.  Top tip: Before going on, do try on what you have pinned. Be careful not to stab yourself when doing this but this will help to see how the skirt will fit and check the length. With some assistance, the waist of my skirt had to be taken in a bit to make it more snug. This was simply pinned on both sides. As the waist was altered the darts needed to be checked but I was lucky as the alignment was still good. With the skirt ajusted I gently wiggled out of it and went and make the slight alterations. To ensure this was accurate, where the new pins

Marking with chalk

were I marked with tailors chalk on the wrong side of the fabric before removing them. This shows a line which will need to be drawn and again measured 1.5cm to get the seam correct. Top tip: If any alterations are made at this stage it is good to pin the pattern back on the fabric when cutting out the alterations. This will save time when you make the skirt next time as the measurements will all ready have been done!

Overlocking bliss!

With the fabric cut the edges needed to be tidied in order not to fray or damage the fabric. There are numerous ways this can be done however we were fortunate enough to have overlockers. I've never used an overlocker before so Claire-Louise showed me how to use it and I was amazed by this machine. It first cuts the fabric then encapsulates the edges by weaving four threads around them - it was flippin' fantastic and now on the wants list! Top tip: If you don't have an overlocker another way to tidy the edges is with a zig-zag stitch. Let one stitch go into the fabric and the other fall out of it so it catches the loose threads. This is good but won't work on all fabrics, so please check before trying! The pieces of fabric were overlocked on three sides (leaving the top) and I was ready to join the pieces together.... but that is for another day and another blog.

Again, I learnt so much in a short amount of time. From cutting the fabric, marking darts, using overlockers and again that patience is crucial when learning something new. Next time I will look at sewing, facings and invisible zips!

Top tips:

• Equipment: Pattern, dress makers ruler (or a long ruler), hemming ruler, tape measure, scissors, tailors chalk, pins, overlocker (or a zig zag stitch) and a mirror to look at your garment under construction.
• Before going on, do try on what you have pinned. Be careful not to stab yourself when doing this but this will help to see how the skirt will fit and check the length
• If any alterations are made at this stage it is good to pin the pattern back on the fabric when cutting out the alterations. This will save time when you make the skirt next time as the measurements will all ready have been done!
• If you don't have an overlocker another way to tidy the edges is with a zig-zag stitch. Let on stitch go in the fabric and the other fall out of it so it catches the loose threads. This is good but won't work on all fabrics, so please check before trying! 
• Patience!!!!!!!!!!

Useful websites/ blogs:

• Thread Magazine website - http://www.threadsmagazine.com/item/4513/video-accurate-darts-without-permanent-marks
• Tilly and the Buttons - http://www.tillyandthebuttons.com/2013/01/marking-cutting-fabric.html

Happy Overlocking x

Fabric Perfection

Hello Ladies and Gents…

With such a glorious day it has given me the boost to share with you the next installment about making an 'A' Line skirt. I attended a one day course ran by The Thrifty Stitcher in Stoke Newington, North London and so far I have shared with you my pearls of wisdom on pattern cutting from a beginners perspective. I will now share with you how to prepare your fabric before the big snip-snip...

Now before you cut your fabric, the fabric must be washed and pressed. The washing of the fabric will decrease the likelihood of the fabric shrinking once the garment is made – you don’t want all your hard work to shrink in the wash and come out all teeny and toasty. The pressing of the fabric will ensure it is smooth again decrease the likelihood of cutting out the wrong size pieces as after all smooth fabric is a smaller surface than creased. So, top tip: wash and press.

So with my washed and pressed fabric and with the pattern size selected we Mark the 'Wrong Side' turned to look at the fabric. I selected a fabric that was plain, but spoke volumes in colour as it was such a vibrant royal blue. A plain colour is quite difficult to decide which side is the ‘right-side’ of the fabric. With close examination, it is the side that is the smoothest appearance. Top tip: Once you know which is the ‘right-side’ put strips of tailors chalk on the ‘wrong-side’ – this easily identifies what side is which and will reduce the likelihood of stitching the wrong sides together. I folded the fabric in half (wrong-sides together) and smoothed the fabric over with my hand. To ensure the fabric is aligned line up the selvedge edges and not the edges that are fraying - this will normally highlight if the fabric has been cut straight. I placed the front pattern piece on the fold – this is so there are no seams at the front of the skirt and to follow the grain. I then placed the back piece on the fabric.

Now, this part is quite complex for my little brain to deal with, but I will do my

Ready for the Snip!

best to explain. With the front piece being on the fold, it naturally follows the grain line as you have smoothed the fabric so that the selvedge edges are aligned. For the back piece you need to align the pattern with the grain. On the pattern it will highlight the direction of the grainline – this needs to be straight and follow the direction of the thread. I measured the distance between the top-edge as the pattern needs to be the same distance to ensure the fabric grain is correct. A great blog that also explains this is by Tilly and the Button called Before You Cut Your Fabric - link below. With my fabric ready I placed my pattern onto my it and pinned into place... ready to be cut.

This phase taught me a great deal about the fabric itself - about the selvedge, grain, grainlines, etc - all adding to memory banks for future reference! Next time I will blog about cutting the fabric and pinning....

Top tips:

• Equipment: Washing machine, iron, fabric, tailors chalk, pins and sewing pattern
• Wash and press
• Once you know which is the ‘right-side’ put strips of tailors chalk on the ‘wrong-side’ – this easily identifies what side is which and will reduce the likelihood of stitching the wrong sides together

Useful websites/ blogs:

• Tilly and the Buttons -  http://www.tillyandthebuttons.com/2013/01/before-you-cut-your-fabric.html

Again, I'd would like to say a massive thank you to Claire-Louise and to all at The Thrifty Stitcher for a wonderful creative day.

Happy Fabric Time x